105
4.5.1 Map Screen settings
You can fine-tune the appearance and content of the Map screen. Tap
the following buttons:
, , .
Button Description
3D Settings
Use 3D settings to determine which of the
present 3D objects are shown on the map, and
adjust the level of 3D visual detail. The options
are as follows:
• Elevated Roads: Complex intersections
and vertically isolated roads (such as
overpasses or underground tunnels) are
displayed in 3D.
• Terrain Detail Level: 3D terrain map data
shows changes in terrain, elevations or
depressions in the land when you view
the map, and use it to plot the route map
in 3D when you navigate.
Color Profiles
Nextar Navigation System is able to show the
map and the menus in different colors during the
day and during the night. Select the color
profiles to be used in each mode, and select the
automatic or manual switching between the
daytime and night color profiles.
Elevation on 2D Map
2D maps can also display 3D information. These
top-down maps can display elevation by colors
and shading.
Show Street Names
Street names and POI icons can be disturbing
on the map during navigation. With this switch
you can suppress these map elements when
Nextar Navigation System is following your
position on the map. If you move the map, both
the street names and POI icons reappear
To Next Page
Loading...
Need help?
General
