116
4.5.9 Device settings
You can change some device settings to control the screen backlight
when Nextar Navigation System is running. Tap the following buttons:
, , .
Button Description
Power Management
You can set how the backlight will behave when
the screen has not been touched for a while.
You have the following options:
• Backlight Always On: The screen is
continuously lit.
• Smart: When running on battery, Smart
Powersave will light up the screen only
when you tap the screen, or if there is
something to show you. After a few
seconds the light level decreases, and
after another few seconds the backlight
turns off. This helps achieve a longer
battery life.
Backlight Intensity at
Daytime
You can set the backlight level for daytime use.
Backlight Intensity at
Night
You can set the backlight level for night use.
4.5.10 Track Log settings
You can set up automatic Track Log saving, and fine-tune related
settings. Tap the following buttons:
, , .
Button Description
Update Interval This determines how often track points will be
To Next Page
Loading...
Need help?
General
