58
Every time a new point is added, the route is recalculated
automatically and you can start navigating right away.
3.4 Editing the route
This feature is available in Advanced mode only.
Tap the following buttons:
, , .
The list of route points appear with the start point at the top of the list
and the final destination at the bottom. If several via points exist, you
might need to scroll between pages.
Tap one of the route points in the list. You have the following options:
Button Action
The selected point moves up in the list (becomes a via
point to be reached earlier). Tap this button repeatedly,
and the point becomes the start point of the route.
The selected point moves down in the list (becomes a
via point to be reached later). Tap this button
repeatedly, and the point becomes the final destination
of the route.
The route is reversed. The start point becomes the
destination, the destination becomes the start point, and
all via points are to be reached in the opposite order
than before.
The route is optimized. The start point and the
destination remain at their position, but the via points
are reordered to make the shortest possible route.
The selected point is removed from the route.
As soon as you leave this screen, the route is recalculated
automatically, and you can start navigating right away.
To Next Page
Loading...
Need help?
General
