[ 73 ]
Security features
13
PUK codes
The PUK (Personal Unblocking Key) and PUK2 codes are 4- to 8-digit codes
obtained from your service provider. The PUK code unblocks a blocked PIN
code, and the PUK2 code unblocks a blocked PIN2 code.
Unblock a PIN code
1
Press
Menu 5 6 5
, then press
Select
.
Change PIN code appears.
2
To unblock the PIN2 code, press to select
Change PIN2 code
.
3
Press
Select
.
PIN code blocked
appears.
4
Enter the PUK code, then press
OK
.
Caution:
If you enter a wrong PUK code ten times in a row, the SIM
card becomes invalid and you must contact your service provider for
a new card.
5
Enter the new PIN code, then press
OK
.
6
Enter the new PIN code again to verify, and press
OK
.
Caution:
You cannot change the PUK or PUK2 code, so keep a record
of them in a safe place. If you lose them, contact your service provider.
If you try to change the PIN2 code, and you enter a wrong PUK2 code ten
times in succession, you can’t use functions requiring the PIN2 code.
Contact your service provider for a new SIM card.
• Security code
You need the security code to access some security features. When the
phone requires the security code, it displays
Security code:
.
• Enter the code then press
OK
.
If you enter an incorrect security code five times in a row, the phone will
not accept the correct code for 5 minutes.
To Next Page
Loading...
Need help?
General
