Scanning With the Machine 6-25
Editing/Deleting Group Dial Destinations
Information registered with a group dial destination can be edited or deleted.
1 In the main screen (Scan mode), press the or key to select UTIL-
ITY
, and then press the ENTER key.
2 Press the or key to select DIAL REGISTER, and then press the
E
NTER key.
3 Press the or key to select GROUP DIAL, and then press the ENTER
key.
4 Use the keypad to type in the number (between 1 and 20) for the group
dial destination to be edited/deleted, and then press the ENTER key.
The information currently registered for the group dial destination appears
for about two seconds.
5 Press the or key to select EDIT to edit information or DELETE to
delete the destination, and then press the ENTER key.
If
DELETE was selected, the settings are deleted, and the DIAL REG-
ISTER
menu appears again.
6 If desired, edit the group name, and then press the ENTER key.
" For details on entering/editing text, refer to “Entering Text” on
page A-6.
7 Press the or key to select ADD to add a speed dial destination,
CHECK/EDIT to delete the destination or FINISH to finish editing, and
then press the ENTER key.
If
FINISH was selected, the edited settings are saved, and the DIAL
REGISTER
menu appears again. If ADD was selected, continue with step
6 of “Registering Group Dial Destinations” on page 6-24. If CHECK/EDIT
was selected, continue with step 8.
8 Press the or key to select the speed dial destination to be deleted,
and then press the S
TOP/RESET key.
" To check the settings for the selected speed dial destination, press
the E
NTER key.
9 Press the or key to select Yes, and then press the ENTER key.
10 After the speed dial destination is deleted, press the Back key.
11 To delete another speed dial destination, repeat the procedure from step
8.
12 To finish deleting speed dial destinations, press the or key to select
FINISH, and then press the ENTER key.
To Next Page
Loading...
Need help?
General
