About Duplex Printing 3-17
About Duplex Printing
Duplex (double-sided) printing can be performed when the duplex option has
been installed on this machine.
" For details on installing the duplex option, refer to “Duplex Option” on
page 10-7.
If the paper has low opacity (high translucency), then the printed data from
one side of the page will show through to the other side. Check your applica-
tion for margin information. For best results, print a small quantity to make
sure the opacity is acceptable.
Note
Only Letter/A4 plain paper, 60–90 g/m
2
(16–24 lb bond) can be
autoduplexed. See “Print Media” on page 3-2.
Duplexing labels, letterheads or thick stock is not supported.
How do I autoduplex?
Check your application to determine how to set your margins for duplex
(double-sided) printing.
The following Binding Position settings are available.
If “Short Edge Binding” is selected, the pages will be laid
out to flip at the top.
If “Long Edge Binding” is selected, the pages will be laid out
to flip at the side.
1
3
1
2
1
1
1
1
1
2
3
To Next Page
Loading...
Need help?
General
