Replacing Consumables7-4
Replacing a Toner Cartridge
Note
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
If
MACHINE SETTING/TONER OUT STOP in the UTILITY menu is set to
ON or ON(FAX), the message TONER OUT/CHANGE X TONER (where
“X” indicates the color of the toner) appears when the toner cartridge is nearly
empty. Follow the steps below to replace the toner cartridge.
1 Check the message window to see which color toner cartridge needs
replacing.
" If the machine detects that a toner cartridge is empty (TONER
OUT
or TONER LIFE END appears), the empty toner cartridge is
automatically moved so that it can be replaced.
If this has occurred, skip steps 2 through 5, and continue with
step 6.
" If MACHINE SETTING/TONER OUT STOP in the UTILITY menu is
set to OFF, printing can continue even after the message “Toner Out
X” has appeared; however, the printing quality cannot be guaranteed.
If printing is continued and the toner becomes empty, the message
“TONER LIFE END/CHANGE X TONER” appears and printing stops.
For details on the setting, refer to “MACHINE SETTING Menu” on
page 2-22.
2 With the main screen displayed, press the key to display the PRINTER
MODE screen.
3 Press the key to select T/C CHANGE and then press the ENTER key.
4 Press the ENTER key to select REPLACE MODE.
5 Press the or key to select the color for the toner cartridge to be
replaced, and then press the ENTER key.
The toner cartridges rotate within the machine to move the toner cartridge
of the selected color to a position where it can be replaced.
" To exit REPLACE MODE, press the STOP/RESET key.
To Next Page
Loading...
Need help?
General
