Olympus OER-Pro User Manual

Supplement to OER-Pro Instruction Manual
Some functions are unavailable depending on the software version. Check if the software version
number is displayed after the power activation according to Section 4.1, “Power activation and opening
the water faucet”. If the software version number is not displayed after the power activation, an older
software version is installed and the following functions are unavailable. For software upgrade, contact
Olympus.
Functions unavailable in older version Related part in operation manual
Software version number display after the power
activation.
Section 4.1, “Power activation and opening the water faucet”
on page 75.
Restarting reprocessing process after the error
code [E93] is displayed.
Section 4.9, “Reprocessing” — “When the error code [E93] is
displayed during the alcohol flush process” on page 117.
Print options:
 Automatic printing
 Error history print on the “PRINT TODAY”,
“PRINT ALL”
Section 4.11, “Printing of the reprocessing records”:
 Table 4.3 on page 130
 Table 4.4 on page 131
 “AUTOMATIC PRINTING (Prints the reprocessing
records automatically)” on page 133
Section 6.11, “Print function setup” on page 180.
Print format modifications:
 Add start time
Section 4.11, “Printing of the reprocessing records”:
 “PRINT FORMAT (Reprocessing Result)” on page 145
 “PRINT FORMAT (Error Result)” on page 146
 “PRINT FORMAT (PRINT TODAY, PRINT ALL)” on
page 147
Continuous buzzer beep while the error code is
displayed.
Section 8.1, “Troubleshooting guide” — “Error codes and
remedial actions” on page 276.
Printing function for troubleshooting. Section 8.3, “Printing function for troubleshooting” on
page 286.
Also, “Test strip forceps (GT867700)” described in Chapter 1, “Checking the Package Contents” may not
be equipped depending on the version of the device. If the device is not equipped with test strip forceps
(GT867700), the following function is unavailable. To obtain the test strip forceps (GT867700), contact
Olympus.
Functions unavailable in older version Related part in operation manual
Check the concentration of the disinfectant solution
during the reprocessing by using test strip forceps
(GT867700).
Section 3.10, “Checking the disinfectant solution concentration
level” — “When checking the concentration of the disinfectant
solution during the reprocessing” on page 63.

Olympus OER-Pro Specifications

General

Brand	Olympus
Model	OER-Pro
Category	Laboratory Equipment
Language	English