Chapter 4 Reprocessing Operations
145
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
PRINT FORMAT (Reprocessing Result)
Figure 4.57
If the RFID function has not been enabled at the factory, the
columns for the serial numbers of endoscopes, model names
of endoscopes, user number, and user name will be left
blank.
2012/04/01 14:30
Process Started:
2012/04/01 15:00
Process Completed:
User name
Serial number of scope (when two scopes were reprocessed)
Model name of scope (when two scopes were reprocessed)
User number
Model name of scope
Year/Month/Day and Hour/Minute
of the end of process
Setting details
Serial number of this equipment
Total accumulated process count
Serial number of scope
Cleaning time (minutes)
Disinfecting time (minutes)
Disinfectant solution temperature (C)
“” when leak test is executed
“” when alcohol flushing is executed
•Wash
•Dis
•Temp
•Leak
•Alc
User check columns
The check results of precleaning, connecting tube
connection conditions and disinfection
concentration test can be entered by the user.
“” when leak test is executed
Year/Month/Day and Hour/Minute
of the start of process
To Next Page
Loading...
Need help?
General
