Olympus OER-Pro User Manual

98
Chapter 4 Reprocessing Operations
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
 When loading two 190 series endoscopes
1
When placing the endoscope connector of the second
endoscope, hold the endoscope connector of the first
endoscope to avoid contact. Otherwise, the endoscope
connector of the first endoscope may be damaged by the
contact with S-cord connector mount of the second
endoscope.
As shown in Figure 4.21, put the endoscope connector of the second endoscope
in place while slightly lifting the endoscope connector of the first endoscope to
the left (direction of arrow 1).
Figure 4.21
Place the universal cord on the
inside of the hook
Endoscope connector of
the second endoscope
1
S-cord connector mount
Put the endoscope
connector of the second
endoscope in this area
Endoscope connector of
the first endoscope
1 190 series endoscopes may not be available in some areas.

Olympus OER-Pro Specifications

General

Brand	Olympus
Model	OER-Pro
Category	Laboratory Equipment
Language	English