266
Chapter 7 Routine Maintenance
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
7.17 Installing the printer paper roll
Do not touch the printer or its surroundings during and
immediately after printing. They will be very hot and may
cause burns.
• Always use the Olympus-designated printer paper roll with
this equipment. Otherwise, incorrect printing or equipment
failure may result.
• To prevent printer failure or printer paper roll discoloration, do
not touch the printer or printer paper roll with wet hands.
• Always keep the printer cover closed. Otherwise, the printer
and/or printer paper roll may get wet and cause malfunction.
• To avoid damage to or deterioration of the printout, do not
allow the paper to make contact with the following:
Alcohol or detergent
Oil, fat, organic solvents, or chemicals (medical, industrial
or cosmetic)
Stamp ink
Water
Materials containing plasticizer (PVC film, desk mat,
leather products, journal cover, etc.)
Certain stationery (plastic tape, mending tape,
fluorescent-ink pen, oil-ink pen, adhesives other than
starchy paste)
• To prevent discoloration of unused paper, store the printer
paper roll without opening in a place meeting the following
conditions.
Dark, cool place
Environment not exposed to NOx, SOx, or O
3 (ozone)
• When red lines appear on both sides of the printer paper roll
during printing, replace the printer paper roll.
To Next Page
Loading...
Need help?
General
