Olympus OER-Pro User Manual

Chapter 7 Routine Maintenance
219
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
2. Turn the float switch cover in the direction shown to remove.
Figure 7.49
3. Clean the float switch cover in running water. Remove dirt using a soft brush
with detergent.
4. While applying clean water to the float switch, clean the stem using the
brush. Move the float up and down manually and thoroughly clean around
the stem. Rinse the float switch by pouring clean water over it.
Figure 7.50
Float switch cover

Olympus OER-Pro Specifications

General

Power Supply	AC 100-240 V, 50/60 Hz
Disinfection	Peracetic acid-based disinfection
Compatibility	Olympus flexible endoscopes
Cleaning Stages	Disinfection, Rinse
Type	Automated Endoscope Reprocessor