Omron K3MA-J User Manual

5-31
OPERATION
Advanced-function setting level
5-22 Specifying the Zero-limit (K3MA-J)
5-22 Specifying the Zero-limit (K3MA-J)
These parameters allow you to specify the zero-limit.
The zero-limit is a function to process all the readouts lower than the set value as zero.
When you select "ON", the values lower than the zero-limit value are always
displayed as "0".
This function is useful when you want to indicate a minus numerical value as zero or
indicate the minimum value of input range as zero.
Procedure
A. When the product is at the operation level, press
the L key and hold it down for at least three
seconds to enter the initial setting level.
•" 5 " will appear on the level indicator, indicating
the product has entered the initial setting level.
B. Enter password "-0169" in parameter " amov " to
enter the advanced-function setting level. For
details on how to move to the advanced-function
setting level, refer to "5-2 Moving among Levels".
•" f " will appear on the main indicator, indicating
the product has entered the advanced-function
setting level.
C. Press the M key several times until parameter
"z-lim" appears on the main indicator.
D. Press the S key to display the set value of the
parameter on the main indicator.
• The current set value of zero-limit will appear on
the main indicator.
E. Press the S key again.
• The set value will start blinking, indicating the
product is in the change state.
Parameter Set value Description
z-lim
(Z-LIM)
off
OFF: Zero-limit function is not available.
on
ON: Zero-limit function
lim-p
0-99 0 to 99: Zero-limit value
lim-p
z-lim
(Z-LIM)
(LIM-P)

Omron K3MA-J Specifications

General

Brand	Omron
Model	K3MA-J
Category	Measuring Instruments
Language	English