Omron ns series User Manual

2-2 Exiting Ladder Monitor
40
2-2 Exiting Ladder Monitor
1. Press the Menu Button on the Main Screen.
2. The Exit Ladder Monitor Dialog Box will appear. Press the OK Button.
3. The Ladder Monitor will be ended, the PT will return to RUN mode, and the screen
that was displayed before the Ladder Monitor was started will appear.
Note: If the PT system version is 6.5 or lower, the PT will be reset and the initial screen will
appear.
Note
Confirm system safety before turning the power ON/OFF or resetting.
Otherwise, the system may operate unpredictably.

Omron ns series Specifications

General

Brand	Omron
Model	ns series
Category	Touch terminals
Language	English