Omron ns series User Manual

3-3 Displaying the Desired Program Section
3-3-6 Searching for Output Instructions from Input Bits
56
3-3-6 Searching for Output Instructions from Input Bits
Use the following procedure to search for the next output instruction with the same
address as an input bit.
1. Press the basic instruction in the ladder program area twice.
2. A dialog box will be displayed to confirm the search. Check the address and press
the OK Button.
(1) Press twice consecutively.
(2) Press the
OK
Button.
3. The next sequence output instruction (OUT, OUTNOT, DIFD, DIFU, SET, RSET, or
KEEP only) that uses the same address as the input bit in that cell will be searched for,
and the program section that is found will be displayed.
Search for sequence output
instruction that uses the same
address as the input bit.

Omron ns series Specifications

General

Brand	Omron
Model	ns series
Category	Touch terminals
Language	English