Omron ns series User Manual

3-1 Main Screen
3-1-5 Inputting Addresses and Numbers
47
3-1-5 Inputting Addresses and Numbers
Use the following buttons to input addresses and numbers in dialog boxes. (The format
depends on the dialog box, but the operations and settings are the same.)
(1)
(2)
(6)
(7)
(4)
(5)
(3)
No. Item Contents
(1) Input character display Displays the currently input alphanumeric string. If there are
multiple input locations in a single dialog box, the input object can
be switched by pressing the input character display. The input
character display that is currently receiving the input is displayed
in yellow.
(2) Bit/word Used to select bits or words when inputting an address.
(3) Address Area Buttons Used to selects the address area.
(4) 0 to 9 and A to F
Buttons
Use to input numerals.
(5) Period Button Inputs periods to delimit the word address from the bit number.
(6) BS Button Clears the rightmost character in the input character display.
(7) CLR Button Clears the character string in the input character display.

Inputting Addresses
•
Inputting Bit Addresses
Use either of the following formats to input bits.
• [Word address] . (period) [Bit number]
• [Word address] [Bit number]
If a period is not used, then the rightmost two digits will be treated as the bit number. If a
period is used, there is no need to input leading zeros in bit numbers. There is no need to
input leading zeros in the word addresses.
Input Examples
Selected address area Tenkey input example Input result
CIO 612301 6123.01
CIO 6123.01 6123.01
CIO 115 0001.15
W 1 W000.01
W 0.1 W000.01

Omron ns series Specifications

General

Brand	Omron
Model	ns series
Category	Touch terminals
Language	English