xiv
Introduction
OS32C
User’s Manual
EtherNet/IP and Measurement Data -- -- Supported
*1. Requires Configuration Tool Version 1.4.0 and up
*2. Requires Configuration Tool Version 1.6.0 and up
*3. If serial number of the sensor block is higher than AS08300 and Configuration Tool is version 1.6.0 and up
*4. Requires Configuration Tool is Version 1.8.0 and up
Configuration Tool Version
before 1.4.0 1.4.0 and up 1.6.0 and up 1.8.0 and up
Configurable minimum object resolution -- Supported Supported Supported
Standby mode with laser shutoff -- Supported Supported Supported
Copy & paste zones and zone sets -- Supported Supported Supported
Record system monitoring -- Supported Supported Supported
Playback system monitoring -- Supported Supported Supported
Support for inverting 7-segment display -- Supported Supported Supported
Display configuration filename in config tool header -- Supported Supported Supported
Additional zone shapes (180
°
semi-circle, 180
°
rectangle, 180
°
polygon)
-- Supported Supported Supported
Config tool support for switching between default
OS32C configuration and the user's current working
configuration
-- Supported Supported Supported
Troubleshooting tips displayed in fault log -- Supported Supported Supported
Configuration checksum, safety checksum -- Supported Supported Supported
Windows 7 support -- Supported Supported Supported
Non-safety checksum -- -- Supported Supported
Single Import & Export Zone Coordinate Data -- -- Supported Supported
Maintenance access level -- -- Supported Supported
Rotation of monitor screen view -- -- -- Supported
French, German, Italian & Spanish Languages -- -- -- Supported
Multiple Import & Export Zones Coordinate Data -- -- -- Supported
Model Sensor Head P/N
Configuration Tool Version
before 1.4.0 1.4.0 and up 1.6.0 and up 1.8.0 and up
OS32C-SN 40591-0010 Supported Supported Supported Supported
OS32C-SN 40591-0020 -- Supported Supported Supported
OS32C-SN-DM 40591-0040 -- -- Supported Supported
To Next Page
Loading...
Need help?
General
