44
Chapter3
OS32C
User’s Manual
Basic Operation of Configuration Software
Logging On
1. From Utilities menu, select Log On.
2. The Log On screen is displayed. Select an IP address of the OS32C to be connected.
Fig. 3-12 Logging On
3. Select User access level and enter a password. The initial password for the maintenance access level
is "mainusr". The initial password for the supervisor access level is "supeusr".
4. Click Continue.
5. When connected, the IP address and User access level of the OS32C are displayed.
Fig. 3-13 Logged On to Sensor
Logging OFF
From the Utilities menu, select Log OFF and click OK.
Changing Password
To limit access by an unauthorized user, the password may be changed. The user needs to log on to
the OS32C with the desired access level to change the password. The following steps describe this
process:
1. Log on to OS32C with the desired access level.
2. From the Utilities menu, select Change Password.
3. Enter the current password.
4. From Change Password, select an access level you want to change.
5. Enter the new password.
6. Enter the new password again for confirmation.
7. Click Change Password.
To Next Page
Loading...
Need help?
General
