Omron OS32C Series User Manual

46
Chapter3
OS32C
User’s Manual
Basic Operation of Configuration Software
Changing Ethernet Configuration of OS32C
1. From the Utilities menu, select Ethernet Configuration.
2. To configure the OS32C to DHCP mode, select Obtain an IP Address automatically. To configure the
OS32C to a fixed IP address, select Use the following IP address to specify an IP address. Set an IP
address correctly according to the network environment.
Fig. 3-15 Ethernet IP Address
3. Click Write to Sensor.
4. Confirm the change in Ethernet configuration. Click NO to abort the change.
5. The following window is displayed. Read the message and decide if you want to continue to use the
current IP address or start using the new address now.
Fig. 3-16 Ethernet Configuration

Omron OS32C Series Specifications

General

Brand	Omron
Model	OS32C Series
Category	Scanner
Language	English