Omron OS32C Series User Manual

8
Chapter1
OS32C
User’s Manual
Description of Use and Features
Fig. 1-8 Automated Guided Vehicles, Bi-directional (AGV)
In this application two OS32Cs are the primary guarding devices. The two warning fields of the OS32C
are used to give personnel extra warning, allowing them to move out of the AGV path. This is essential
in achieving maximum travel efficiency.
Fig. 1-9 Automated Guided Vehicles, Multiple Zones (AGV)
In this application the OS32C is the primary guarding device. The drawing illustrates a common AGV
guarding configuration where 4 zone sets are used to safely navigate the vehicle around a factory floor.
The four zone sets consist of two for forward motion (high speed, low speed), one for left turn and one
for right turn. The active safety zone set is selected by the AGV’s controls, which are configured for
maximum efficiency.
Right Turn Zone
Fast Zone
Left Turn Zone
Slow Zone

Omron OS32C Series Specifications

General

Brand	Omron
Model	OS32C Series
Category	Scanner
Language	English