Omron R88D-KN20F-ECT-R User Manual

4-5
4-1 Installation Conditions
OMNUC G5-series AC Servomotors and Servo Drives User’s Manual (with Built-in EtherCAT Communications)
4
System Design
Decelerator Installation Conditions
Using Another Company's Decelerator (Reference)
If the system configuration requires another company's decelerator to be used in combination
with an OMNUC G5-series Servomotor, select the decelerator so that the loads on the motor
shaft (i.e., both the radial and thrust loads) are within the allowable ranges. (Refer to
Characteristics on page 3-2 for details on the allowable loads for the motors.)
Also, select the decelerator so that the allowable input rotation speed and allowable input
torque of the decelerator are not exceeded.

Omron R88D-KN20F-ECT-R Specifications

General

Brand	Omron
Model	R88D-KN20F-ECT-R
Category	Servo Drives
Language	English