Log in as the Default Administrator
4-2 StorageTek SL150 Modular Tape Library Installation Manual
Illustration Legend:
1 - Start Button
The Log in as the Default Administrator screen appears (see Figure 4–2).
Log in as the Default Administrator
For library initialization, the User ID always has the value of admin.
Figure 4–2 Default Administrator Login
Illustration Legend:
1 - Log In Button
To log in as the default administrator:
1. Tap the keyboard button to access the screen for entering characters in the
Password field.
2. Enter the first letter of the default password (passw0rd) by tapping the P key on
the keyboard screen (see "Initialization Wizard Keyboard Screens").
3. Verify that the proper character appears in the Password field.
4. Enter the remaining characters of the default password.
5. Tap either the Done buttonortheEnter key after entering the last character of the
password.
Note: The touch screen does not provide accessibility settings
(support for screen readers, large fonts, or high contrast).
Note: Tap the Backspace key and reenter the character if
necessary.
Note: The last entered character is shown (an * is present for the
other characters).
To Next Page
Loading...
Need help?
General