C
Robot Locking for Reshipment C-1
CRobot Loc king for Reshipment
The following instructions define the process of locking the SL150 robot hand before
reshipment after rack installation.
Task 1 Power Down the Library
1. Locate the power button on the front of the SL150 library.
2. Press and release the power button.
The power down dialog box appears on the touch screen panel (see Figure C–1).
3. Tap the Power Down button on the touch screen.
4. Follow the instructions on the touch screen panel to position the robot for removal.
5. Continue with Task 2 after the library completes the power down process.
Figure C–1 Library Power Down Function
Illustration Legend:
1 - Power Button
Task 2 Verify Hand Position
1. Remove the right cartridge magazine from the base module (see "Remove the
Cartridge Magazines," if necessary).
Caution: Improper installation of the lock could cause catastrophic
failure during shipment.
To Next Page
Loading...
Need help?
General