Generating Active Capacity Reports
14-2 StorageTek SL8500 Library Guide
Generating Active Capacity Reports
1. In SLC, select Tools > Select Active Cells > View Reports tab.
2. Select a report:
■ Cartridge and Cell Media Summary - displays slot addresses and volume
serial numbers (volsers) for media within the active capacity area
■ Orphaned Cartridge Report - displays a detailed list of all orphaned
cartridges
Generating Partitioning Reports (Single Library Only)
1. In SLC, select the Tools > Partitions > Reports tab.
2. Select a type of report from the menu:
■ Cartridge Cell and Media Summary — displays slot addresses and volume
serial numbers (volsers) for the media in each partition
■ Orphaned Cartridge Report — displays slot addresses and volume serial
numbers (volsers) for orphaned cartridges
■ Partition Summary — displays the resources allocated to each partition
■ Partition Details — displays details for a specific partition ID
Generating Diagnostic Files for Oracle Support
Your Oracle support representative may request that you capture and transfer the
Management Information Base (MIB) or Log Snapshot file.
Status Summary Cartridge Table Lists cartridge location, media type, label, and status information.
Device Reserve Table Lists elevator, robot, and PTP reservation information.
Drive Table Lists drive location, type, and serial number information.
CAP Summary Lists the location of the CAPs.
Cartridge Summary Lists the location, media type, and label information for all cartridges in the library.
Drive Summary Lists drive location, type, serial number, code information, and device details.
Library Information Lists the library physical configuration, code version, and state of the library.
Robot Summary Lists robot address and state.
Status Detail CAP/Drive/Robot
Details
Lists identifying information, code version, and status of the devices.
Library Details Lists the library physical configuration, code version, and state of the library.
Versions Hardware Versions Lists the FRU serial number for controller cards, CAPs, robots, and PTPs.
Software Versions Lists the code version for controller cards, CAPs, elevators, robots, and PTPs.
Audit Log Feature Audit Log Lists all feature activation activity for the life of the library. To view only the current
hardware activation files, see "Displaying Current Hardware Activation Files" on
page 5-2.
CAP Usage
Messages
Messages Lists the CAP usage messages. To define the messages, see "Modifying Bulk CAP
Messages" on page 8-4
Table 14–1 (Cont.) SLC Reports
Folder Report Description
To Next Page
Loading...
Need help?
General