Troubleshooting Host Connectivity
16-8 StorageTek SL8500 Library Guide
The local operator panel reboots automatically after an unsuccessful second
calibration and restores the previously saved alignment.
Resetting the Local Operator Panel to Factory Settings
1. Log into the local operator panel.
2. In SLC, select Tools > Calibrate.
3. Click Reset Calibration. The local operator panel reboots.
Troubleshooting Host Connectivity
■ Use a sniffer (a device or program that traces the network traffic for the library).
■ Display the port statistics on the switch or router connected to the library. Search
for any errors.
■ Run a trace with the library management software that displays host-to-library
packets and transmissions.
■ Verify that two separate hosts are not competing to manage one library or one
partition. To view current host connections, see "Viewing Library Operational
Status" on page 13-1. Click the HLI tab.
To Next Page
Loading...
Need help?
General