15
Changing Online/Offline Status and Rebooting 15-1
15
Changing Online/Offline Status and Rebooting
■ Taking the Library Offline
■ Bringing the Library Online
■ Taking a Device Offline
■ Bringing a Device Online
■ Rebooting the Library
■ Rebooting the Local Operator Panel
■ Rebooting an Elevator
■ Rebooting a Robot
Taking the Library Offline
1. Take all library drives offline (see "Taking a Device Offline" on page 15-2).
2. In SLC, select Tools > System Detail.
3. Select the Library in the device tree.
4. Click the Status tab, and then the General tab.
5. In the Transition Request field, click Tak e o ff l ine.
6. Click Apply. Before the library goes offline, all outstanding library jobs complete.
7. Wait for the offline confirmation message. If the library does not come offline,
check the status of the library (see "Viewing Library Operational Status" on
page 13-1).
When to place the library offline:
■ Before powering down the library
■ Before opening a library access door
■ When the library is inoperative and requires maintenance
Note: Always try to take the library offline with ACSLS or ELS
software before using SLC.
To Next Page
Loading...
Need help?
General