Note: Oracle neither supports nor assumes any responsibility for
drive functional failures that occur during the unauthorized use of
the drive's maintenance port.
Library Tray Rear Panel
1-4 StorageTek T10000 Tape Drive Operator’s Guide
Unauthorized use applies to any use of the drive's Ethernet port for other than the
following items:
■ Encryption 1.x environments (not supported by T10000C and T10000D)
■ Encryption 2.x environments
■ StorageTek Virtual Operator Panel (VOP) customer or service versions
■ Service Delivery Platform (SDP)
■ Service's Tape Health Check Tool
■ StorageTek Diagnostic System (STDS)
The T10000C and T10000D drives support IPv6 addressing. With drive code level
1.40.x07 or higher, the T10000A orB drive supports IPv6 addressing.
T10000D Library Tray
The rear panel of an SL3000 library drive tray for the T10000D is shown in Figure 1–3.
Figure 1–3 SL3000 Library Drive Tray Rear Panel (T10000D)
Status and Maintenance Indicators
The drive tray has two single color indicators: STATUS (green) and MAINT (yellow).
The state of the indicator(s) conveys a meaning:
Green indicator only (on solid)
Indicates the drive is functional.
Green indicator only slow flashing
The drive is in boot monitor mode.
Green indicator only fast flashing
The drive is in IPL mode.
To Next Page
Loading...
Need help?
General