Oracle StorageTek T10000 User Manual

Other Configuration Settings
C-4 StorageTek T10000 Tape Drive Operator’s Guide
■ TAA (Tape Application Accelerator)
Preset value is TAA N .
Options: Sync, TMK, All, or No (N)
■ MaxCap (StorageTek Maximum Capacity)
Preset value is MaxCap OFF .
Options: OFF or ON
Note: If the drive interface type is changed, the SFileAcel, TAA, and
MaxCap parameters are reset to the factory default (Preset) value.
Other Configuration Settings
The following registers are set to the conditions shown:
■ IP Node Name: T10000-<last 9 digits of Serial Number>
■ SNMP Alerts: All turned OFF
■ Library Locator: ACS: 0 LSM: 0 Panel: 0 Drive: 0
■ SNMP Managers: None Specified
■ Drive Statistics: All zeroed
■ Permanent Errors: All zeroed, pointers initialized.
■ Temporary Errors: All zeroed, pointers initialized.

Oracle StorageTek T10000 Specifications

General

Brand	Oracle
Model	StorageTek T10000
Category	Storage
Language	English