To Next Page

To Previous Page

View or Change TCP/IP Settings

Menu System 4-19

Defaults to the last saved selection.

Procedure:

1. Do one of the following actions:

a. Press Menu to bypass.

b. Press Select to start the change mode.

2. For each digit:

a. Press Select to increment the flashing digit until the desired value appears.

b. Press Menu to set.

If you attempt to enter a value greater than 255 in either trio, all digits flash when

the last digit is set.

3. Press Menu to advance to the next submenu; or, press Select to restart the change

mode.

Note: If all digits flash, press either Select or Menu to clear; then,

press Select to restart the change more.

Gateway Hi Submenu

Note: Manufacturing ships drives with a static Gateway Hi set to

either

000.000

.or

255.255

Operator panel window shows

GWhaaa.bbb

Valid entries are 000-255 for each digit trio.