To Next Page

To Previous Page

View or Change TCP/IP Settings

Menu System 4-17

– Press Select to toggle; then, press Menu to set and advance to the next

submenu.

Note: When

DHCP Y

is active, you cannot change the static IP, Net

Mask, and Gateway.

IP Address Hi Submenu

The operator panel window shows

IPhaaa.bbb

Note: Manufacturing ships all drives with the static IP Address Hi

set to

010.000

Valid entries are 000-255 for each digit trio.

Defaults to the last saved selection.

Procedure:

1. Do one of the following actions:

a. Press Menu to bypass.

b. Press Select to start the change mode.

2. For each digit:

a. Press Select to increment the flashing digit until the desired value appears.

b. Press Menu to set.

If you attempt to enter a value greater than 255 in either trio, all digits flash when

the last digit is set.

3. Press Menu to advance to the next submenu; or, press Select to restart the change

mode.

Note: If all digits flash, press either Select or Menu to clear; then,

press Select to restart the change mode.

IP Address Lo Submenu

Note: Manufacturing ships all drives with static IP Address Lo set

000.001

Operator panel window shows

IPlccc.ddd