Dropped Cartr idges
A-4 StorageTek T10000 Tape Drive Operator’s Guide
Figure A–1 Cartridge Inspection Points
Illustration Legend:
1 - Case screw (4x)
2 - Write-protect switch
3 - Sonic weld area
7. Open and close the tape access door (1, Figure A–2) several times, and examine the
door for damage.
If the door is visibly damaged, does not open, or does not close smoothly, discard
the cartridge.
Caution: Do not attempt to force the leader back into the home
position. If the leader is not in the home position, contact your
service representative.
8. Hold the tape access door open, and determine if the leader (2, Figure A–2)isin
the home position (securely butted against stops).
Figure A–2 Cartridge Door and Tape Leader
Illustration Legend:
1 - Tape access door
To Next Page
Loading...
Need help?
General