Oracle StorageTek T10000 User Manual

T10000C/D Additional Parameters
Initial Drive Configuration Settings C-3
Operator Panel Display: WWN
Preset: Normal (assigned)
Option: Normal, Custom
Initial TCP/IP Menu Settings
■ Dynamic Host Control
Operator Panel Display: DHCP N
Preset: N
Option: Yes (Y), No (N)
■ Static IP Address
Operator Panel Display: IPh010.000 and IPl000.001
Preset: 10.000.000.001
Option: aaa.bbb.ccc.ddd
■ Sub Net Mask
Operator Panel Display: NMh255.255 and NMl255.000
Preset: 255.255.255.000
Option: aaa.bbb.ccc.ddd
■ Gateway
Operator Panel Display: GWh255.255 and GWl255.255
Preset: 255.255.255.255
Option: aaa.bbb.ccc.ddd
FICON Configuration Differences
The FICON interface has the following configuration differences:
■ Emulation Mode: Emul VSM
Preset: VSM
Options: VSM, 3592
■ Drive Address (device):
Preset: 00
Option: Two-digit hexadecimal
All other configuration settings are the same as shown previously.
T10000C/D Additional Parameters
Between the Lib Adr xy parameter and the drive node WWN parameter, there are
additional parameters for the T10000C/D drive:
■ SFileAcel (StorageTek File Sync Accelerator)
Preset value is SFileAcelY .
Options: No (N) or Yes (Y)

Oracle StorageTek T10000 Specifications

General

Brand	Oracle
Model	StorageTek T10000
Category	Storage
Language	English