E9480UD_EN.qx3 04.7.22 8:26 PM Page 63 <)
Picture Settings 63
_* Before you begin, make sure the Recorder is in DVD mode, Press DVD so
the DVD light appears on the front of the Recorder',
Press SYSTEM MENU. Press _91to select 1"_, in the top left
corner of the menu bar at the top of the TV screen.
Press • to select [_, then press I_.
Press • or • to selectTV Shape, Black level shift,Video shift,
or Component video output.Then, press I_ and follow step 4
according to your choice.
_ If you selected TV Shape, press • or • to select 4:3 letter-
box, 4:3 panscan, or 16:9, then press OK.
Select 4:3 letterbox if you want to see the widened picture with
black bar's at the top and bottom of the screen.This looks like the
picture you see when watching movies in a theater.This setting is
possible only if the DVD is recorded in letterbox or widescreen for'-
mat,
Select 4:3 panscan if you want the picture to be trimmed or format-
ted to fit your TV screen.This setting is possible only if the DVD is
recorded in the regular format.
Select 16:9 if you connected the Recorder to a widescreen TV.
_* If you selected Black level shift, press • or • to select On
or Off, then press OK. Set Black level shift to On to improve the
color contrast and brighten the picture of NTSC Discs.
_* If you selected Video shift, press _1 or I1_ to center the pic-
ture horizontally on your TV screen - or "shift" the video. When
you are satisfied with the position of the picture, press OK.
_* If you selected Component video output, press SELECT
repeatedly to choose Interlaced or Progressive Scan. Select
Progressive Scan only if you used the COMPONENTVIDEO OUT
(Y PB PR)jacks on the Recorder to connect it to aTV that has
Progressive Scan. See page 12. Otherwise, choose Interlaced.
If you choose Progressive Scan, PRO will appear on the display panel.
Do not set Component video output to Progressive Scan
unless you have a component video connection to aTV.
Otherwise, you will lose the DVD picture from the
Recorder to theTV.You will have no picture at theTV.
PHILIPS
I lea 0ff no _ I ten o_ no
5
I 1 ten off ne off >
1 1 2 lee off no
TVSha_e
Blacklevelshiff
Videoshiff
Press SYSTEM MENU to remove the menus.
Helpful Hints
The picture format you select
f'orTV Shape must be on the
DVD. I( not, the settings for TV
Shape will not affect the pic-
ture.
Some widescreen TVs may show
only part of'the Recorder's
menu.Adjust the screen mode
on yourT_ See yourTV owner's
manua! for details.
To Next Page
Loading...
Need help?
Operating Environment
Power
Weight and Dimensions
