Philips DVDR600VR User Manual

E9480UD_EN.qx3 04.7.22 8:26 PM Page 68 <)
68 VCR Status Displays
You may accessVCR status displays that show the current videotape infor-
mation,
_ Before you begin, make sure the Recorder is inVCR mode. PressVCR so
theVCR light appears on the front of the Recorder.
Press DISPLAY to access or remove theVCR status display.
• indicates videotape play is stopped
I_indicates play
• indicates recording
oo2 Current TV channel
st.... Audio available on
current TV channel
(Stereo or SAP)
0:00:00
_Videotape counter
Current videotape speed
VCR REC STOP DVOREC
MODEpLAyfToDE AUtO PAUSE
@©©©
VOLUME
_lv_ s_2H
PHILIPS
Helpful Hint
When you turn on the
Recorder in VCR mode, the dis-
play appears for five seconds.
You cannot access a videotape
status display when viewing a
still picture, during slow motion,
or during forward and reverse
searching.
Channel numbers appear on
the TV screen only for a few
seconds each time you change
TV channels in VCR mode
when the status display is off
o

Philips DVDR600VR Specifications

Operating Environment

temperature range (operation)	0°C to 40°C

Power

standby power consumption	< 3 W
power supply	90.140 V AC (120 V nom), 50/60 Hz

Sound

signal/noise ratio	95
distortion and noise (1kHz)	85 dB
dynamic range (1kHz)	85 dB
D/A converter	24 bit, 96 kHz
crosstalk (1kHz)	95 dB

Video Recording

tape speeds	LP, SP
recording system	NTSC
recording modes	M1: 60 minutes, M2: 120 minutes, M2x: 150 minutes, M3: 180 minutes, M4: 240 minutes, M6: 360 minutes
max recording time on DVD	6 hr

Audio Playback

MP3 bit rates	32 - 320 kbps
compression format	Dolby Digital, PCM, MPEG2 Multichannel, MP3, DTS

Picture/Display

D/A converter	10 bit, 54 MHz

Weight and Dimensions

packaging dimensions	542 x 181 x 375 mm
product dimensions	435 x 100 x 262 mm