E9480UD_EN.qx3 04.7.22 8:26 PM Page 73 <_
DVD to Videotape Duplication 73
I _,HEADHI-FI STEREO _ _O_D_
,--.e ..................
Follow the steps below to copy a DVD to a videotape. This will be possi-
ble only if the DVD is not copy protected.
Before you begin:
_* Put a videotape in the cassette compartment. Make sure the tape's
record tab is intact and the tape is long enough to record the DVD,
Advance the tape to the point at which you want to start recording.
_* Put the DVD you want to copy in the disc tray. Advance it to the point
at which you want to start recording, then press STOP •.
_* PressVCR so theVCR light appears on the front of the Recorde_
_ Turn on the TV and set it to channel 3, 4, or its Video Input.
With the Recorder in VCR mode, press REC MODE until
the desired tape speed (SP or SLP) appears briefly on the
screen. Details about tape speed are on page 79.
Press DVD so the DVD light appears on the front of the
Recorder.
Press D.DUBBING on the front of the Recorder. The unit will
be in recording standby mode, REC will flash in theVCR display
_anel.
DVD_VOR Dubbi_g]
ii!iiii!!iiiii\
Press D.DUBBING on the front of the Recorder again to
start recording. The DVD will start playing automatically, and the
tape counter will show recording progress in the VCR display panel,
REC will appear on theVCR display panel.
DVD_VCR Dubbing
_I To stop recording, press STOP • on the front of the
b_ Recorder on a DVD+R/DVD+RW or a video tape,
Helpful Hint
• Youcannotcopya DVDto a
videotapeif youare using
ProgressiveScan.
To Next Page
Loading...
Need help?
Operating Environment
Power
Weight and Dimensions
