Philips DVDR600VR User Manual

E9480UD_EN.qx3 04.7.22 8:26 PM Page 72 <)
72 Rerecording (Tape Duplication)
These instructions show you how to copy videotapes.The illustration uses two Recorders. OtherVCRs or Camcorders may oper-
ate differently.
l.Audio cables from AUDIO OUT jacks (red and white) of
Recorder 1 toAUDIO IN jacks of Recorder 2
F
Recorder 1
Playingunit
2.Video cable from yellow
VIDEO OUT jack of
Recorder I toVIDEO IN
jack of Recorder 2
..............................................................................................................................
Recorder 2
Recording unit
3. RF coaxial cable from the
(Antenna) OUT jack of Recorder
2 to theTV's ANTENNA IN jack
Make the connections shown above.
Recorder I will play your tape, Put a prerecorded tape into thecassette compartment of Recorder |. Press VCR to put the
unit inVCR mode if necessary.
Recorder 2 will record your tape. Insert a blank tape in the cas-
sette compartment of Recorder 2. PressVCR to put the unit in
VCR mode if necessary.
Turn on theTV and set it to channel 03. (To use channel 04
instead, see page 10.)
Point the remote control at Recorder 2. Press CHANNEL
A/V to select EXT2 or CAM1. (See Helpful Hints at right.)
Press REC MODE to select SP or SLP as the tape recording
speed at Recorder 2.
Press RECORD • (VCR) on the front of Recorder 2 then
press PLAY I_ (VCR) on the front of Recorder 1.
To stop recording, press STOP • / EJECT __ (VCR) on Recorder 1,
then press STOP • / EJECT __ (VCR) on Recorder 2.
Helpful Hints
• If you use theAUDlO andVIDEO
IN jacks on the back of Recorder
2, press CHANNEL • I • to
select EXT2 at step 5. EXT2 will
appear on the TV screen.
• If you use theAUDlO andVIDEO
In jacks on the front of Recorder
2, press CHANNEL •l • to
select CAM 1 at step 5. CAM 1
will appear on the TV screen.
• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright
laws.
• Ifa program has copyright pro-
tection, it may not record clearly.
o

Philips DVDR600VR Specifications

Operating Environment

temperature range (operation)	0°C to 40°C

Power

standby power consumption	< 3 W
power supply	90.140 V AC (120 V nom), 50/60 Hz

Sound

signal/noise ratio	95
distortion and noise (1kHz)	85 dB
dynamic range (1kHz)	85 dB
D/A converter	24 bit, 96 kHz
crosstalk (1kHz)	95 dB

Video Recording

tape speeds	LP, SP
recording system	NTSC
recording modes	M1: 60 minutes, M2: 120 minutes, M2x: 150 minutes, M3: 180 minutes, M4: 240 minutes, M6: 360 minutes
max recording time on DVD	6 hr

Audio Playback

MP3 bit rates	32 - 320 kbps
compression format	Dolby Digital, PCM, MPEG2 Multichannel, MP3, DTS

Picture/Display

D/A converter	10 bit, 54 MHz

Weight and Dimensions

packaging dimensions	542 x 181 x 375 mm
product dimensions	435 x 100 x 262 mm