EasyManuals Logo
Home>Polaris>Offroad Vehicle>RZR PRO XP 4 2021

Polaris RZR PRO XP 4 2021 User Manual

Polaris RZR PRO XP 4 2021
598 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #162 background imageLoading...
Page #162 background image
3.18
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
HEAD PIPE / TURBO REMOVAL
1. Remove the exhaust pipe. See Exhaust Pipe
Removal page 3.16 outlined in this chapter.
2. Remove two P-clip fasteners retaining the oil feed line
to the turbo bracket assembly.
3. Remove two hoses
q
from the turbo going to the
boost control valve. Mark hoses for correct
reinstallation to the boost control valve.
4. Remove the banjo bolt
w
retaining the oil inlet hose
and remove the oil drain hose
e
.
CAUTION
Use caution when removing oil feed line to avoid
bending/damaging the hard line.
IMPORTANT
The oil line sealing washers MUST be replaced any
time the oil line/fitting is removed. Use only the
recommended washers shown in the Polaris Electronic
Parts Catalog.
5. Remove two fasteners
r
and remove the coolant
inlet hose
t
and outlet hose
y
.
6. Remove two fasteners
u
retaining turbo bracket to
the turbo.
7. Loosen four fasteners
i
on the engine mounting
bracket and pivot the top of the turbo bracket forward.
8. Remove two fasteners
o
and remove the lower turbo
heat shield.
ENGINE / COOLING SYSTEM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris RZR PRO XP 4 2021 and is the answer not in the manual?

Polaris RZR PRO XP 4 2021 Specifications

General IconGeneral
BrandPolaris
ModelRZR PRO XP 4 2021
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals