Polaris RZR PRO XP 4 2021 User Manual

5.14
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
FUEL LINE REMOVAL / INSTALLATION
(EVAP)
q
Fuel Supply Line
r
Zip Tie (attached to fuel purge line)
w
Fuel Purge Line
t
Double Clip (attached to frame)
e
Retaining Clips (attached to fuel pressure regulator
bracket)
1. Place a shop towel around the fuel line to catch any
dripping fuel.
2. To remove fuel line
q
, pull open tabs while moving
the clip out to release the line.
3. Release the fuel line from applicable retaining clips/
zip ties. See image/table above.
4. Remove fuel line from the vehicle.
5. To install the line, verify the connectors are clean and
free of debris.
6. Place the fuel line back over the fitting and slide
connector locking mechanism back into place. Verify
connector tabs snap back into place.
7. Turn the key on to prime the system. Check for
leaking at each end of the fuel line.
EFI / FUEL SYSTEM

Polaris RZR PRO XP 4 2021 Specifications

General

Brand	Polaris
Model	RZR PRO XP 4 2021
Category	Offroad Vehicle
Language	English