11.18
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
7. Loosen two voltage regulator mounting bracket
fasteners
o
. Do not remove fasteners.
8. Disconnect all headlight and accent light electrical
connections.
9. Remove two push pins
a
and remove front fascia.
REAR FASCIA
1. Remove six fasteners
q
and remove rear bumper.
2. Disconnect all electrical connections from rear
taillights.
3. Remove ten fasteners
w
from rear fascia.
4. From the rear wheel well, remove one push pin
e
on
either side of the rear fascia, and remove rear fascia.
BODY / FRAME
To Next Page
Loading...
Need help?
General
