EasyManuals Logo
Home>Polycom>Conference System>SoundStructure C16

Polycom SoundStructure C16 User Manual

Polycom SoundStructure C16
712 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #103 background imageLoading...
Page #103 background image
Customizing SoundStructure Designs
5 - 21
input signal. As a result, 48 dB of gain on a SoundStructure input is equivalent
to a gain of 15 dB on a Vortex mic/line input that is in mic mode because of the
additional 33 dB of gain on the Vortex when in mic mode.
Since there is only one large input range on SoundStructure devices, it is easier
to see how much gain is required for each microphone input.
Gain settings are adjusted by moving the slider or typing the input value into
the user control. Values can also be adjusted by clicking on the slider and using
the up and down arrows to increase or decrease the value by 1 dB and by using
the page up and page down keys to increase or decrease the value by 10 dB.
By supporting -20 dB as part of the analog gain range, effectively there is a 20
dB adjustable pad that makes it possible to reduce the gain of input sources
that have a nominal output level that is greater than the 0 dBu nominal level
of the SoundStructure devices.
Mute
The mute status of an input virtual channel, or virtual channel group, may be
changed by clicking the Mute button. When muted, the channel will be muted
after the input processing and before the input is used in the matrix as shown
in the following figure. The location of the input signal mute in the signal pro-
cessing path ensures that the acoustic echo canceller, automatic gain control,
feedback reduction, and noise canceller continue to adapt even while the input
is muted.
Phantom Power
48 V phantom power may be enabled or disabled on a per input basis by click-
ing the phantom power button. The SoundStructure device supports up to 7.5
mA of current at 48 V on every input. By default, phantom power is turned off
for all inputs if there is no SoundStructure Studio configuration loaded into the
device.
Mic or Line
Input
Input to
Matrix
Input to
Matrix
Parametric
Equalization
A/D
Converter
Analog
Gain
Acoustic Echo
Cancellation
Noise
Cancellation
Automatic
Gain Control
Automixer
AGC Dynamics Fader Delay
Fader
Automixer
Automixer
Delay
Automatic
Gain Control
Non Linear
Processing
Feedback
Cancellation
Dynamics
Processor
Dynamics
Processor
Fader
Input to
Matrix
Automatic
Gain Control
Fader Delay
Dynamics
Processor
Delay
Mute
Router
Recording/
Ungated
Conferencing
Sound
Reinforcement
C-Series Input Processing
Input to
Matrix
Input to
Matrix
Delay
Delay
Input to
Matrix
Delay
Delay
Mute

Table of Contents

Other manuals for Polycom SoundStructure C16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom SoundStructure C16 and is the answer not in the manual?

Polycom SoundStructure C16 Specifications

General IconGeneral
BrandPolycom
ModelSoundStructure C16
CategoryConference System
LanguageEnglish

Related product manuals