Polycom SoundStructure C16 User Manual

The SoundStructure VoIP Interface
12 - 43
Customizing SoundStructure Telephony Settings
You can use the telephony settings to customize the behavior of the Sound-
Structure VoIP Interface with the following options.
Name Possible Values Description
Auto Answer Enable or
Disable (default)
Enables or disables answering the phone
automatically after the second ring.
Entry Tone Enable (default) or
Disable
Determines whether the system plays a tone when
the phone is auto answered.
Exit Tone Enable (default) or
Disable
Determines whether the system plays a tone when
the phone auto hangs up after the remote caller
hangs up.
Ring Tone 1 Normal ring
(default)
2 Low trill
3 Low double trill
4 Medium trill
5 Medium double trill
6 High trill
7 High double trill
8 Highest trill
9 Highest double trill
10 Beeble
11 Triplet
12 Ring splash
13 Low trill
precedence
14 Silent
Customizes the default ringtone to one of 14
values. The default ringtone corresponds to the
Default Ringtone in the Web Configuration Utility
under Preferences > Ringtones > Default Ringtone.
You can further customize the ringtone for an
individual line from the Web Configuration Utility
under Settings > Lines > Line 1 > Ring Type. The
default value for the Ring Type is to use the Default
Ringtone setting from Preferences > Ringtones
Tone Gain -20 to +20 dB. Default is
0.
Sets the level of the entry and exit tones.
Do Not Disturb Enable or
Disable (default)
Determines whether the entire SoundStructure
VoIP Interface is in Do Not Disturb mode. This
setting will affect all line registrations and is not
adjustable on a per line basis.

Polycom SoundStructure C16 Specifications

General

Brand	Polycom
Model	SoundStructure C16
Category	Conference System
Language	English