Command Protocol Reference Guide
A - 113
Description
This parameter sets the RMS level (in dBFS) of the input signal above which
the peak limiter engages. The peak limiter will ensure that the peak level never
exceeds this threshold.
Algorithm Parameters
aec_en
Enable Acoustic Echo Canceller
Description
This parameter enables (1) or disables (0) the acoustic echo cancellation (AEC)
algorithm.
aec_noise_fill
Enable Noise Fill
Default 0.0
User Limits
Supported
No
Event Source No
Argument Argument value
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input
Virt Chans Mono, Stereo
Default 0
Event Source No
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input