Polycom SoundStructure C16 User Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
13 - 38
8 Microphones And Stereo Video Conferencing
This example creates a stereo video conferencing system with eight table
microphones, stereo program audio, a VSX8000 stereo video codec, and a
stereo audio amplifier. This application is similar to the 8 microphone mono
example shown previously with the addition of the stereo video codec that
enables both a positional “receive” signal from the remote site and enables a
positional “transmit” signal with the local microphones that can be panned to
the two output channels to encode the position of the local talker to the remote
participants.
The block diagram of this system is shown in the following figure. The channel
names are labeled with the virtual channel names that are created by default
by the SoundStructure Studio software.
The steps to design this configuration are similar to the mono case with the
exception of selecting stereo program audio, a stereo VSX8000, and a stereo
amplifier.
SoundStructure
C12
Table Mic 1
Table Mic 2
Table Mic 3
Table Mic 4
Table Mic 5
Table Mic 6
Table Mic 7
Table Mic 8
Program Audio (L)
Program Audio (R)
VSX8000 In (R)
Phone In
VSX8000 Out (R)
VSX8000 In (L) VSX8000 Out (L)
Phone Out
Amplifier (L)
Amplifier (R)
Stereo Conferencing SoundStructure Installation

Polycom SoundStructure C16 Specifications

General

Brand	Polycom
Model	SoundStructure C16
Category	Conference System
Language	English