Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
2 - 14
C-Series Submix Processing
Submixes are outputs from the matrix that can be routed directly back to the
input of the matrix as shown in the following figure.
As an output of the matrix, any combination of input signals may be mixed
together to create the output submix signal. This output signal can be pro-
cessed with the submix processing and the processed signal will be available
as an input to the matrix. Typically microphone, remote audio sources, or
other signals will be sent to a submix channel and the resulting submix signal
used as a single input in the matrix.
Submix Processing
Up to 8th order highpass and lowpass filters
1st or 2nd order high shelf and low shelf filters
10-bands of parametric equalization
Dynamics processing: gate, expander, compressor, limiter, peak limiter
Signal fader gain: +20 to -100 dB
Signal delay: up to 1000 msec
Submix
Processing
Matrix
Output
SubMix
Signal
Matrix
Input
To Next Page
Loading...
Need help?
General
