EasyManuals Logo

QSC LA108 User Manual

QSC LA108
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
EXPLANATION OF SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed, the result may be bodily
injury or death.
The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it
may result in damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.
The term "NOTE" is used to indicate additional useful information.
NOTE: The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-
insulated “dangerous” voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to humans.
NOTE: The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important
safety, and operating and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE.
WARNING!: Before placing, installing, rigging, or suspending any loudspeaker product, inspect all hardware,
suspension, cabinets, transducers, brackets and associated equipment for damage. Any missing, corroded, deformed, or
non-load rated component could significantly reduce the strength of the installation or placement. Any such condition
severely reduces the safety of the installation and should be immediately corrected. Use only hardware which is rated for
the loading conditions of the installation and any possible short-term, unexpected overloading.
Never exceed the rating of the hardware or equipment.
Consult a licensed, professional engineer regarding physical equipment installation. Ensure that all local, state and national
regulations regarding the safety and operation of loudspeakers and related equipment are understood and adhered to.
WARNING!: The LA108 weighs 13.7 kg (30.1 lb), and the LA112 weighs 21.4 kg (47.2 lb). Use proper precautions
when lifting or moving.
During assembly and disassembly, make sure the loudspeakers are properly, physically supported throughout the entire
process.
While it is possible for one person to lift a LA108 or LA112 loudspeaker, it is important to use proper lifting techniques.
Suggested reading: OSHA Technical Manual on Back Disorders and Injuries.
(http://www.osha.gov/dts/osta/otm/otm_vii/otm_vii_1.html#app_vii:1_2).
1. Keep these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this apparatus near water.
5. Clean only with a dry cloth.
6. Install in accordance with the manufacturer's instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QSC LA108 and is the answer not in the manual?

QSC LA108 Specifications

General IconGeneral
Amplifier PowerN/A (passive)
Frequency Response65 Hz – 20 kHz
ConfigurationPassive
Enclosure MaterialBirch plywood
Power Handling1600 W (Peak)
Impedance16 ohms

Related product manuals