The Auto Demo feature lets you
activate your "IVto automatically
demonstrate a variety of its on-screen
displays and adjustments. You may
want to use this feature to show off
your new digitally-controlleA TV to
your friends.
-Starting Auto Demo
1. Turn on TV.
2. Press and hold the SETUP
button on the front of the TV.
3. while holding the SETUP
button, press the POWER
button.
4. Auto Demo will begin as soon
as you release both buttons.
I _ELC'OHE TO A
Dg_QHSTRATIOH 0F
OUR COMPLETE REHOTK
CDHTROL $YST[H
PUSHSETUP TO EHD
The
and
TV will automatically display
adjust these functions.
I. Displays welcome message.
2. Displays Video Menu.
3. Adjusts COLOR control to
maximum.
4. Adjusts TINT control to
minimum.
5. Activates AUTO RESET
function to restore COLOR
and TINT controls.
.
7.
.
Displays Audio Menu.
Changes BALANCE control
far fight, then to far left, and
then back to midpoint.
Shows first page of Setup
Menu.
The demonstration takes about 1.5
minutes and will continue to repeat
itself until you turn it off.
.Turning Off Auto Demo
To turn off Auto Demo, press any
button on the "IV.
Note: The buttons on the remote
control are not functional while the
TV is in the Auto Demo mode. To
turn off Auto Demo, you must
press a button on the T_.
O
The Auto Demo feature can be
turned off at any time during the
demonstration by pressing any
button on the TV.
However, if you turn Auto Demo
off while the TV is adjusting the
BALANCE, the BALANCE
function may need to be adjusted
back to your original setting.
M
To Next Page
Loading...
Need help?
General
