USB Cable Connection
• USB connection is possible under Windows 98 SE/Me/2000/XP, Windows Server 2003, Mac
OS 9.x, and Mac OS X.
• Windows Me supports USB1.1 speed.
• USB connection with Mac OS is only possible via the printer’s USB port, not the Gigabit Ethernet
board's USB port.
• A USB cable is not supplied with this printer. Select your cable according to the computer.
1. Connect the USB cable to the printer.
• Connecting the USB cable to the standard USB port
Connect the smaller connector of the USB cable to the USB port on the left side of the printer.
• Connecting the USB cable to the Gigabit Ethernet board USB port
Connect the smaller connector of the USB cable to the USB port of the Gigabit Ethernet board.
2. Connect the opposite end’s flat connector to the desired device such as your computer’s
USB interface, or a USB hub.
The printer is now connected to the computer. The Plug and Play screen appears on the computer
display. See "Installing the Printer Driver Using USB", Software Guide for details.
3. Connecting the Printer Cables
62
To Next Page
Loading...
Need help?
General