Plain paper
Paper thickness
60 to 105g/m
2
(16 to 28lb.)
• [Plain Paper]: 60 to 81g/m
2
(16 to 28lb.)
• [Middle Thick]: 82 to 105g/m
2
(22 to 28lb.)
Printer setup
• [Plain Paper]: Select [Paper Input] [Paper
Type: XXX] (XXX: Tray 1 to 5, Bypass Tray)
[Plain Paper].
• [Middle Thick]: Select [Paper Input] [Paper
Type: XXX] (XXX: Tray 1 to 5, Bypass Tray)
[Middle Thick].
Printer driver setup
• [Plain Paper]: Select [Plain] in [Paper Type].
• [Middle Thick]: Select [Middle Thick] in [Pa-
per Type].
Supported paper feeding tray Any input tray can be used.
Paper capacity
• Tray 1 or tray 2: 550
• Tray 3: 550 (500/1000-sheet paper feed
unit) or 2000 (2000-sheet paper feed unit)
• Tray 4 or tray 5: 550
• Bypass tray: 100
• Make sure paper is not stacked higher than
the upper limit mark ( ) inside the tray. When
using the bypass tray, make sure paper is not
stacked higher than the paper guides inside
it.
Duplex printing Supported
Additional cautions
When printing on the reverse side of plain paper
that is already printed on, select [Paper Type:]
[XXX] (XXX: Tray 1 to 5, Bypass Tray)
[Plain:Dup.Back] using control panel or printer driv-
er.
Paper Recommendations
87
To Next Page
Loading...
Need help?
General