Security Features
SM Appendix 4-17 D255/D256/M281/M282
Configuration
 Without admin privileges, even authenticated users will be unable to access the DS via
WIM.
Bit 7:
Bit 7 = 0 (default): Allows anyone (guests, users, admins) access to the DS via WIM.
Bit 7 = 1: Only administrators and authenticated users can access the DS via WIM.
The most restrictive result of combining these three configurations will take priority. So for
example:
Bit 0 = 0
Bit 1 = 1
Bit 7 = 1
As Bit 1 = 1 is the most restrictive of the three, it will take presedence over the other two and only
administrators will be able to access the DS via WIM.
 In order for SP5-885-020 to have any effect, the Document Server must be enabled
(SP5-967-001=0). For information about SP5-967-001, refer to Disabling the Document
Server using System SP5-967-001 and Printer SP1-006-001.
 Access to the entire "Job" menu can be restricted using SP 5-888-001. For details, refer
to Use of SP 5-888-001 to restrict access to the "Job" menu on WIM.
To Next Page
General
