When loading paper larger than the bypass tray (longer than A4 paper in landscape orientation),
pull out the extender.
2. Load the paper with the print side down, and push it in lightly until you hear a beep.
Fan sheets before loading so that multiple sheets of paper do not stick to each other and are not
fed at once.
When loading envelopes or letterhead paper, confirm the orientation, face and back, or location
of flaps.
page 207 "Envelope Orientation and Recommended Status"
page 210 "Loading Orientation-fixed Paper or Two-sided Paper"
Align the paper guides to the paper size.
• To load paper on the bypass tray, it is better to orient it in the direction of .
Loading Paper into Tray 3 (LCT)
(mainly Europe and Asia)
Tray 3 (LCT) can hold A4 portrait paper only. If you want to print on 8
1
/
2
× 11 portrait paper from Tray
3 (LCT), contact your service representative.
(mainly North America)
Tray 3 (LCT) can hold 8
1
/
2
× 11 portrait paper only. If you want to print on A4 portrait paper from Tray
3 (LCT), contact your service representative.
• You can load paper in both the left and right sides of the tray.
• The paper in the right side of Tray 3 (LCT) is fed to the machine. When the paper loaded in the
right side of Tray 3 (LCT) runs out, paper on the left side is automatically shifted to the right, and the
tray continues to feed the paper.
• While printing from Tray 3 (LCT), you can pull out the left side of the tray and load new paper.
Loading Paper into the Paper Tray
189
To Next Page
Loading...
General
